Getriebe-Teile

Neuer A750F/A750E Automatikgetriebekabelbaum 8212560650 für Toyota Hilux 3.0T/4.0L/4.7L (2003-2017)

1. Testing & Quality Control Process Component Inspection : Each part of the harness (wires, connectors, insulation) is inspected for quality and durability. Electrical Testing : The entire harness is tested for conductivity, continuity, and signal integrity. Fit Verification : All connectors and wire lengths are measured to ensure they fit perfectly in the transmission housing. Environmental Testing : The harness is tested for heat, oil, and chemical resistance to withstand

TRANSMESUN Toyota Hilux A750F 5-Gang-Getriebe, interner Magnet-Kabelbaum

1. Product Overview This is a brand-new transmission internal wire harness , OE part number 8212560650 , designed for the Toyota A750F/A750E 5-speed automatic transmission . It is compatible with Toyota Hilux models from 2003 to 2017, including 3.0T, 4.0L, and 4.7L engine variants. The internal wire harness connects the transmission solenoids, sensors, and TCM (Transmission Control Module), transmitting critical signals for gear shifting, pressure control, and fault detection

TRANSMESUN 5T0 M3WC Getrieberückgehäuse 212305T0010 für Honda Fit 1.5L

1. Testing & Quality Control Process Visual & Dimensional Check : The housing is inspected for cracks, warpage, and damage; key dimensions and mounting points verified against OEM specs. Deep Cleaning : The housing is ultrasonically cleaned to remove debris, sludge, and contaminants. Pressure Testing : The housing is pressure-tested to ensure no leaks under operating conditions. Sealing Surface Inspection : Sealing surfaces are checked for damage or warpage that could cause

Gebrauchtes 5T0 M3WC Automatikgetriebe-Rückgehäuse 212305T0010 für Honda Fit 1.5L (2014-2020)

1. Product Overview This is a professionally tested used transmission back housing , OE part number 212305T0010 , designed for the Honda 5T0 M3WC CVT transmission . It is compatible with Honda Fit 1.5L models from 2014 to 2020. The back housing is the rear cover of the transmission, protecting internal components, containing fluid pressure, and providing mounting points for sensors and linkages. This unit has been fully cleaned, inspected, and pressure-tested to eliminate

Austausch des hinteren Gehäuses des Automatikgetriebes Suzuki SX4 AW81-40LS

Gebrauchtes AW81-40LS U440E Getrieberückgehäuse 2473055G30000 / 2473055G31000 für Suzuki SX4 1.6L (2006-2007)

1. Product Overview This is a professionally tested used transmission back housing , OE part number 2473055G30000 / 2473055G31000 , designed for the Suzuki AW81-40LS / U440E 4-speed automatic transmission . It is compatible with Suzuki SX4 1.6L models from 2006 to 2007. As the rear cover of the transmission, this housing protects internal components, contains fluid pressure, and provides mounting points for sensors and linkages. It has been fully cleaned, inspected, and

6F35 Automatikgetriebe-Drehmomentwandler 201150152500013 für Ford Kuga 2.0T

1. Testing & Quality Control Process Raw Material Inspection : High-grade materials verified for strength and durability. Precision Machining : Impeller, turbine, and stator machined to exact OEM tolerances. Balancing Testing : Each torque converter is dynamically balanced to eliminate vibration. Torque Transfer Testing : The converter is tested to ensure it meets factory torque multiplication and efficiency requirements. Leak & Pressure Testing : Seals and welds are tested

6F35 Automatikgetriebe-Drehmomentwandler-Baugruppe 201150152500013 für Ford Kuga 2.0T (2013–2016).

1. Product Overview This is a brand-new automatic transmission torque converter , OE part number 201150152500013 , designed for the Ford 6F35 6-speed automatic transmission . It is compatible with Ford Kuga 2.0T models from 2013 to 2016. As the core component of the automatic transmission, the torque converter transfers engine power to the transmission using hydraulic fluid, allowing the engine to run while the vehicle is stationary. It also multiplies torque during

0CQ Hinterachsantriebsbaugruppe 0CQ525010L für Volkswagen / Audi-Getriebeteile

1. Testing & Quality Control Process Visual & Dimensional Check : The final drive is inspected for wear, cracks, and damage; key dimensions verified against OEM specs. Deep Cleaning : Ultrasonically cleaned to remove all debris, sludge, and contaminants. Gear & Bearing Inspection : Internal gears, bearings, and seals are checked for wear and damage. Noise & Vibration Testing : The unit is tested under load to ensure no abnormal noise or vibration. Leak & Pressure Testing :

Seite 3 von 115